1) Individually proof Tested at 2 ½ times Working Load Limit with certification.
2) Locking system that provides for simple assembly
& disassembly no special
3) Forged Alloy Steel- Quenched and Tempered.
4) Fatigue rated.
Other components
& asemblies required along with lock & set systems.
Large Eye Hook
Oblong Master Link for
Single & Double Legged Slings
Oblong Master Link Sub
Assembly for Three & Four Legged Slings
1)
2)
3)
4)
5)
6)
Orders of minimum 100 nos of sizes ranging from ¼" to ½" and sizes 5/8" and above minimum 60 pcs is required to be ordered.
Minimum chain of standard packing of 250 kgs sizes ¼" to ¾" and sizes above standard packing of 500 kgs is required to be ordered. The chain will be grade 80 to suite the above fittings.
Sufficient hooks and Master links to be kept in stock by the buyer and is available in minimum quantities of 10 nos.
Hooks to be selected with the equivalent values of chains, teh open design of hooks allows foe easy inspection as all hooks and other components are proof tested
seperately.
Determine the overall REACH / Length of the slings.
For any problem involvimg reach, angle of lift or working load limit, call 022-4602281 / 82.
(Method: 1) Place the
locking sleeve between the assembled half link
forgings.
(Method: 2) Drive the pin
through the assembled link ends and sleeve
until the end of the pin is flush with the
outside of the connecting link halves
(Method: 3) Place the hook
on its side and use the assembly link as
system shown in method1 & 2
