NIVERSAL TYPE SHACKL

The Universal shackle allows the cam to generate a clamping force on the work piece no matter which direction it pulled.
  SVC 0.3E - 2E

Lightweight clamp primarily designed for the vertical lifting of steel plates. The unique design of this clamp also makes it possible for lifting work piece to any directions.

FEATURES
  • The spring-loaded tightening lock mechanism assures a positive initial clamping force.
  • The universal shackle allows the cam to generate a clamping force on the work piece no matter which direction it is pulled.
  • The clamping force increases in proportion to the weight of the load.
  • The main body and the shackle are made of die-forged special alloy steels, which are optimally tempered for maximum strength and durability.
  • High-frequency quenching of die-forged special alloy steels gives greater durability to the cam.
  • The main body is a baked-on finish.

  • SPECIFICATIONS
    Item No. Rated capacity (ton) Jaw opening (mm) Weight (kg) Remarks
    SVC 0.3E 0.3 0~16 1.6  
    SVC 0.5E 0.5 0~19 2.1  
    SVC 1E 1 0~25 3.7  
    SVC 1.5E 1.5 0~28 5.5  
    SVC 2E 2 0~32 7.0  

  • Vertical lifting of steel plates
  • Vertical lifting of steel structures
  • When structures have not enough width for two-poinl lifting
  • Vertical lifting of pipes
  • When lifting a pipe, position the clamps so thai they face each other as shown in the drawing. (The lifting angle ot the sling rope must be kept within 60 degrees.)

  • This clamp cannot be used on pipes with diameters less than 300


  • DIMENSIONS TABLE
    Item No. L H h1 h2 h3 B b1 Q2 D1 D2 Ti T2 T3 t
    SVC 0.3E 157~176 110 57 48 30 100 25 19 26 45 49 36 39 8
    SVC 0.5E 180~204 125 67 53 34 110 28 22 30 52 55 40 45 10
    SVC 1E 223~257 160 80 60 38 130 35 29 35 60 65 48 53 12
    SVC 1.5E 254~290 174 88 67 42 1 50 39 33 45 76 74 55 67 14
    SVC2E 292~335 194 97 73 45 162 43 37 55 94 76 58 83 16