90% SAVING IN TIME
A hand splice requires skilled lab our and long hours A Mech. Splice is made in minutes: the Press provides the skill and Mechanical splices needs no "serving".
|
NO RISK OF INJURIES-
The unravel and fray on a Mechanical Splice while hand spliced may injure operators and damage merchandise. It not handled with care.
|
IDENTIFICATION-
The Mech. Splice can easily be marked with Safe working Loads or Rated Capacity, or any
other nation required. We hard punch in the following manner.
Example
LT-106-SWL5Tx3m 25-5-05
|
85% SAVING IN MATERIAL-
In hand splicing a 5ft, length of rope is needed to splice` 1 inch diameter Rope, while a Mechanical Spliced require, only SEVEN INCHES!
|
INCREASED ROPE LIFE-
Because a Mach Splice has much longer working life hence do not require replacement so often.
|
GREAT STRENGTH-
After a Mechanical Splice the ferrule becomes homogenous with the wire rope itself, and universal tests have proved that the B/St of Ferrule Spliced is having 90% the B/St of Rope.
|
