5 TON CAPACITY ELECTRIC WINCH
Motor: CROMPTON/ GEC/ KIRLOSKER" Make Slipring rane Duty Motor 960 RPM, 440 Volt, 3 phase, 1 Hr. rated 40% ED as per IS:325 having 'B' Class insulation.
Drum: Made from Rolled steel as per IS:226 of adequate thickness with side flange. Drum running on Bearing to take adequate rope length.
Shaft: Forged from EN-8 steel machine fitted with Drum.
Chassis: Fabricated from joist of adequate size as per IS:226 to take all shocks. All the stands on the chassis are Boxed type.
Reduction: 1st Reduction: through Elecon/ Radicon make worm reduction Gear Box totally enclosed running on oil. 2nd Reduction: through open machine cut Gear from carbon steel & pinion made of Alloy Steel duly heat treated.
Brake: 1) Electro Magnetic Hydraulic Thruster Brake of reputed make.
2) Mechanical Bend Brake with screw with Ferrodo Brake lineing.
3) Extra safety Ratchet pawl arrangement on the side of the drum for extra safety.
Coupling: A) We will provide flex. Brake Drum coupling on the out put of motor & input of Gear Box. B) Flex, coupling pin type on the output shaft of the Gear Box & In put shaft of the pinion.
Controls: A) Drum controller of TAC Make 5/7 steps. Forward & Reverse mtio.
B) Control panel in sheet metal Box for duct, heat & water resistance containing of:
(a) Isolator (b) Overload Relay (c) Contector (d) Single phase preventor (e) Fuse Hrc (f) Amp. Meter (g) Voilt Meter (h) Neon Lamp Push Button for start & Stop
C) Resistance Box 10 Minute rating.
Wiring & Painting: We will provide all wiring from weather proof are mured copper cable of adequate size & the Winch will be painted by two coats of primer & Two coats of primer of Grey paint.
Operator seat: We will provided operator seat by the side of controls.
|
|
10 TON CAPACITY ELECTRIC WINCH ROPE DRUM FOR 1500 MTR. 28 MM WIRE ROPE.
GENERAL DESCRIPTION:
- SKID Frame Type- Frame made out of heavy steel section.
- M. S. Drum
- M.S. Gear & Pinion. Teeth Cut on Gear Hobbing Machine for Perfect Pitch.
- Reduction through Gear Box and Bull Gear & Pinion. + Hydraulic Thrustor Brake
- Electro Magnetic Brake
- Manual Brake.
- Carbon Steel Shaft
- A Safety Ratchet System
- All controls within reach of operator.
- Variable Speed Motor
- Load & Speed as per Requirement of the Customer.
DETAIL REQUIRED FOR SUBMISSION BY CUSTOMER:
- Rope poll in Tons (Capacity).
- Speed required Mtr./per Min.
- Rope size & Length required on Drum.
- Available Elec. Current supply.
- Description of Application.
- Other accessories required with.
|
